Frigutec^® BS-NF

Frigutec^® BS-NF offers the user the following advantages:

• Corrosion protection
• Antifreeze protection
• Protection against overheating
• Seal compatibility
• Hard water stability
• Cost effectiveness
• Analyses and quality controls
• Flexible quotation
• Weekly, monthly, quarterly and seasonal prices possible

Frigutec^® BS-NF exceeds the requirements of the following coolant standards:

• AFNOR NF R15-601 as of June 1991
• BS 6580:2010
• ASTM D3306

Frigutec^® BS-NF offers year-round protection against frost and corrosion.
Frigutec^® BS-NF concentrate must be diluted with water before use! We recommend a mixing ratio of 1:1 in volume with demineralised or distilled water. Under no circumstances should Frigutec^® BS-NF be used with less than 33 vol.% or more than 60 vol.%.

Frigutec^® BS-NF concentrate only works optimally if you empty the entire cooling system, rinse it and fill it completely with Frigutec^® BS-NF mixed with distilled water in a 1:1 ratio.

In principle, Frigutec^® BS-NF can be mixed with all commercial engine coolant agents based on 1,2-ethanediol (MEG) with mineral additives. However, each manufacturer has found and tested a specially optimised composition of inhibitors which, when mixed with other radiator antifreeze agents from other manufacturers, still work well, but no longer as optimally as Frigutec^® BS-NF alone.

In the event of a warranty claim, it is often impossible to assign the cause that triggered the warranty if several different makes have been used.

Therefore, we recommend the use of Frigutec^® BS-NF only.